Io X3 Capture, Display, Convert v16.2 44 www.aja.com
Timecode Screen
The Timecode screen is used to select the timecode stream read for applications
that use it (for example, in AJA Control Room when the Timecode Source
preference is set to “Control Panel Setting” that application will read the selected
stream). This screen is also used for monitoring the RP-188 timecode embedded
in the digital data stream, for selecting a timecode offset (if required), and setting
timecode outputs.
Options
Source
In RP-188 timecode (SMPTE 12M-gg2) there can be multiple timecode types in the
data stream. Use this pull-down to select the one you wish to monitor:
• RP188 LTC (Linear timecode)
• RP188 VITC (Vertical Interval timecode)
• LTC Port
The selection will be displayed in the timecode value displayed to the right of the
pull-down.
