ROI Series Mini-Converter v1.5r1 6
www.aja.com
Control Interface
For control, the ROI is connected to a computer via USB. The ROI has no local,
physical user-interface (no dipswitch settings). The ROI can operate stand-alone
without a USB connection to the host. In this mode, the ROI automatically adapts
to the input signal, and operates according to defaults or as last configured via
the AJA Mini-Config application (see
"Chapter 2 – Operation" on page 16
HDCP Protection
The ROI honors HDCP, and will not allow an HDCP link. If the input content is
HDCP protected, no source video will be displayed on the ROI’s DVI pass-through
connector, or on the ROI’s SDI output.
Features
ROI-HDMI
• Converts HDMI input to 3G, HD, or SD-SDI output
ROI-DP
• Converts DisplayPort input to 3G, HD, or SD-SDI output
ROI-DVI
• Converts DVI input to 3G, HD, or SD-SDI output
ROI-SDI
• Extracts 3G-SDI input and outputs to 3G, HD, SD-SDI and/or HDMI
All ROI Models
• High quality scaling and scan conversion
• User-adjustable “region of interest,” separate controls for input and output
• 4:3/16:9 conversion modes supported
• Setup via PC/Mac using Mini-Config software with the USB port and supplied
USB cable
• Frame-rate conversion
• Automatic configuration to input video raster and frame rate
• SDI output configurable to most common SD, HD and 3G formats (1080p 60
max)
• Edge filtering control
• Rotation, Horizontal and Vertical flip controls
• Monitor Matrix setup controls
• Frame delay control
• Genlock and frame sync with reference input
• Adjustable Horizontal and Vertical video delay from sync input
• Audio input via 3.5mm 2-channel analog input or 8-channel embedded (if
present) (excluding ROI-SDI model)
• Embedded SDI audio out (up to 8 channels)
• Uses universal input +5V power supply AJA model DWP-U-R1 (included)
• 5-year warranty
