U-TAP Series USB 3 3G-SDI or HDMI Capture Device v1.5.2 9
www.aja.com
Figure 5. Typical U-TAP HDMI Laptop System Connections
HDMI
Digital Video
Camera
USB
Computer
Running Video
Applications
Figure 6. Typical U-TAP SDI Laptop System Connections
SDI
Loop Out
SDI
Video Switcher
USB
Computer
Running Video
Applications
SDI
Monitor
Firmware Update Procedure
U-TAP firmware and updater .msi or .dmg files are available for download from
the AJA website:
1. Download from the AJA website the free AJA_U-TAP.zip package for your
computer operating system.
• AJA_U-TAP_Win.zip or
• AJA_U-TAP_Mac.zip
2. Extract the .zip file on your computer.
3. Connect the U-TAP USB 3 capture device to your computer with the
provided USB 3 cable.
NOTE: Only one U-TAP should be connected to your computer when updating firmware.
4. Run the .dmg or .msi file and install the Updater application.
5. Launch the AJA U-TAP Updater application. If a connected U-TAP is found,
a window opens reporting the current firmware versions installed and the
versions available for update.
NOTE: If a U-TAP is not detected, a No Module Connected message is displayed.
