Voltage protection
If active, power supply will be switched off in
case of a voltage surge beyond the range of
184 – 253 V, in the inactive state — 0 – 500 V
Scenarios
Opens the menu for creating and con guring
scenarios
Jeweller Signal Strength Test
Switches the device to the Jeweller signal
strength test mode
User Manual
Opens the WallSwitch User Manual
Unpair Device
Disconnects the relay from the hub and deletes
its settings
Indication
The WallSwitch light indicator can light green depending on the device status.
When not paired with the hub, the light indicator blinks periodically. When the
functional button is pressed, the light indicator lights up.
Functionality testing
The Ajax security system allows conducting tests for checking the functionality
of connected devices.
The tests do not start immediately but within a period of 36 seconds when using
default settings. The test time start depends on the settings of the detector ping
interval (the Jeweller menu in the hub settings).
Installation of the Device
Regardless of the type of electrical circuit, only a quali ed electrician should install
WallSwitch!
WallSwitch is designed for installation inside a socket box with the diameter 50
mm and more and the depth no less than 70 mm. The relay can also be installed
