within extension cords and other circuits powered by 230 V.
The communication range with the hub in the line of sight is up to 1,000 meters.
Take this into account when choosing the location for WallSwitch.
If the device has a low or unstable signal strength, use the
Installation process:
Do not connect more than 3 kW load to WallSwitch. When connecting the load, strictly
observe the connection diagram since an incorrect connection may cause the device to
malfunction and/or damage the property.
When installing WallSwitch in the box, lead out the antenna and place it under
the plastic frame of the socket. The bigger the distance between the antenna
1. De-energize the cable to which WallSwitch will be connected.
2. Connect the grid wire to the WallSwitch terminals according to the following
scheme:
3. Connect a socket using bundled connecting wires or an electrical appliance
using a wire with the su cient cross-section to WallSwitch. It’s
recommended to use wires with a cross-section of 1.5 – 2 mm².