Installation and connection
Before installing KeyPad Fibra, make sure that you have selected the optimal location
and that it meets the requirements of this manual. Wires must be hidden from view and
located in a place that is di cult for burglars to access to reduce the likelihood of
sabotage. Ideally, the wires should be embedded in the walls, oor, or ceiling. Perform
the Fibra signal strength test before nal installation.
When connecting, do not twist the wires together; solder them. The ends of the
wires that will be inserted into the keypad terminals should be tinned or crimped
with special tips. This will ensure a reliable connection.
Follow safety
procedures and regulations for electrical installation work
.
In order to install the keypad:
1.
In places where parts of clothing (for example, next to the hanger), power
cables, or Ethernet wire may obstruct the keypad. This can lead to the false
triggering of the device.
2.
Inside premises with temperature and humidity outside the permissible
limits. This could damage the keypad.
3.
In places where KeyPad Fibra has an unstable or low signal strength.
4.
Outdoors. This could damage the keypad.
1.
Disconnect the external power and the hub’s backup battery.
1
— External power supply
2
— Backup battery
