Easy armed mode change/Assigned group easy
management
When enabled, changing the security mode with
Tag and Pass does not require con rmation by
pressing the
arm
,
disarm
, or
Night Mode
button.
The security mode is switched automatically.
The option is available if
Pass/Tag Reading
is
enabled in the keypad settings.
If the group mode is activated, the option is
available when the keypad is assigned to a
particular group — the
Group Managemen
t eld
in the keypad settings
Alert with a siren if the panic button is pressed
The eld is displayed if the
Alarm
option is
selected for the
Function
button.
When the option is enabled, the sirens
connected to the security system give an alert
when the * button (
Function
button) is pressed
Jeweller Signal Strength Test
Switches the keypad to the Jeweller signal
strength test mode
Attenuation Test
Switches the keypad to the Attenuation test
mode
Pass/Tag Reset
Allows deleting all hubs associated with Tag or
Pass from device memory
Temporary Deactivation
Allows the user to disable the device without
removing it from the system. Two options are
available:
Entirely
— the device will not execute
system commands or participate in
automation scenarios, and the system will
ignore device alarms and other noti cations
