To use a duress code of a person who is not registered in the system
Enter the
duress code
set in
Keypad Access Codes
and press the
disarming key
.
For example: 4567
→
Security management using Tag or Pass
Note that if
is enabled in the KeyPad Plus settings, you do not
need to press the
Arm
,
Disarm
, or
Night Mode
button. The security mode will change to
the opposite after tapping Tag or Pass.
Mute Interconnected Fire Detectors Alarms function
KeyPad Plus can mute an interconnected re alarm by pressing the Function
button (if the required setting is enabled). The reaction of the system to pressing
a button depends on the settings and the state of the system:
Keep in mind that the option is available only if
1.
Activate the keypad by swiping your hand over it. KeyPad Plus will beep (if
enabled in the settings) and turn on the backlight.
2.
Bring Tag or Pass to the keypad pass/tag reader. It is marked with wave
icons.
3.
Press the
Arm
,
Disarm
, or
Night Mode
button on the keypad.
Interconnected Fire Detectors Alarms have already propagated
— by the
rst press of the Button, all sirens of the re detectors are muted, except for
those that registered the alarm. Pressing the button again mutes the
remaining detectors.
Interconnected alarms delay time lasts
— by pressing the Function button,
the siren of the triggered FireProtect/FireProtect Plus detector is muted.
