The system is disarmed
Two short beeps, the
Disarmed
LED lights up
An incorrect code was entered or there was an
attempt to change security mode by an
unconnected or deactivated pass/tag
Long beep, digital unit LED backlight blinks 3
times
The security mode cannot be activated (for
example, a window is open and the
System
integrity check
is enabled)
Long beep, the current security status LED
blinks 3 times
The hub does not respond to the command —
there is no connection
Long beep,
X
(
Malfunction)
LED lights up
The keypad is locked due to a wrong code
attempt or attempt to use an unauthorised
pass/tag
Long beep, during which the security status
LEDs and keypad backlight blink 3 times
The batteries are low
After changing the security mode, the
X
LED
lights up. The touch buttons are locked for this
time.
When you try to turn on the keypad with
discharged batteries, it emits a long beep, the
X
LED smoothly lights up and goes off, then the
keypad turns off
Functionality testing
The Ajax security system provides several types of tests that help you make
sure that installation points of devices are selected correctly.
KeyPad Plus functionality tests do not start straight away but after no more than
one hub-detector ping period (36 seconds when using the standard hub
settings). You can change the ping period of devices in the
Jeweller
menu of the
hub settings.
Tests are available in the device settings menu (Ajax App
→
Devices
→
KeyPad Plus
→
Settings )
