25
THE DISCRIMINATION MENU
Discriminate
Map
Sp signal:
On
Teach disc:
Off
Left border:
+60
Right border:
+85
Sector width:
16
Fig. 25
In the menu
DISCRIMINATE
the following parameters are available:
MAP
serves for adjusting the discrimination characteristics of the detector.
Because various objects correspond to different VDI numbers it is possible to
adjust the detector to respond to certain objects while ignoring others. Adjusting
the discriminator MAP allows you to do this. To adjust these parameters please
see section
Discrimination mode of search
on p. 32.
SP SIGNAL [on/off]
Turns on/off the special audio sound for certain targets.
When turned on the special signal ( bell tone) will be heard when a targets VDI
falls between the border sectors set below ( left border/ right border).
TEACH DISCRIMINATE [on/off]
Turns on/off the fast teach discriminate mode
(learn accept/reject). When this mode is set to on, while in the normal search
mode, the buttons [
-
] and [
+
] are now used to teach the discriminator to either
accept or reject specific targets. For further explanation please see page 34. If the
parameter is switched off the pressing the + and – buttons adjust key parameters
(p. 17 ).
LEFT BORDER
Defines the left border for the special signal previously described.
When a target falls above the left border VDI and below the right border VDI the
bell tone will be heard.
RIGHT BORDER
Defines the right border for the special signal. When a target falls
below the right border VDI and above the left border VDI a bell tone will be heard e.
SECTOR WIDTH [6- 90]
Defines the sector width for the Teach Discriminate
function of the discriminator and automatic installation of sector special signal.
28
