7
USING YOUR APPLIANCE
POWER OPTIONS:
Batteries: Insert 6 x DC 1.5V
size C batteries (not included)
into the battery compartment.
Adaptor: Plug the adaptor into the AC
power jack on the back of the CD
player, then plug it into the mains
and turn it on.
RADIO:
Plug the CD player into the mains and turn
it on.
Slide the function switch to RADIO.
Select the desired radio band using the
band selector for AM/FM or FM Stereo.
Turn the tuning dial to select the radio
station you require.
Adjust the volume dial to the desired
volume.
RECEPTION:
AM – If AM reception is weak, change the
position of the CD player until it picks up a
stronger signal.
FM – If a stereo broadcast program is being
received, the FM stereo indicator will light
up. During FM or FM Stereo operation,
always extend the wire antenna to ensure
good reception.
CD PLAYER:
When handling a compact disc (CD) place
a finger through the centre and with your
thumb hold the edge of the disc.
T
O USE THE CD FUNCTION:
1. Slide the function switch to CD.
2. Open the CD tray by pressing the door
release button.
3. Place the CD on the tray label side up
and close the CD tray.
4. At this point the CD will spin briefly and
the LED display will show the number
of tracks that are on the disc.
Note:
•
Please do not place anything other than
a CD in the CD tray as this may cause
damage to it.
•
If the disc is dirty or scratched it may
not play correctly.
•
Never force the CD tray as this may
damage the product.
•
Never insert more than one CD at a
time.
CD CONTROLS:
Play/Pause Mode:
Press the Play/Pause
button to begin
playing the CD. Press the Play/Pause button
again to pause playback.
STOP:
Press the Stop button to stop playback.
SKIP UP/SKIP DOWN:
Press the Skip Up
button to skip to the
next song or track on the CD.
Press the Skip Down
button to skip to
the previous song or track on the CD.
