After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
8
Installation (Cont.)
Space requirements
• Door opening:
Place the unit so there is enough space for the doors to open easily.
• Clearances:
Ensure that air can circulate freely around the back of the cabinet,
which is necessary to cool the compressor and condenser. Allow at least 100mm
clear space at the back of the unit (Fig. 1) and 50mm at the sides (Fig. 2).
• Overhanging wall units:
To ensure best performance, if the appliance is positioned
below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least 100mm. Ideally, however, the appliance
should not be positioned below overhanging wall units.
Moving and levelling the appliance
The appliance must be installed level so that it can work properly and the magnetic
door seals are properly aligned. It has four wheels for easy manoeuvrability and
adjustable feet for levelling the unit (Fig. 3).
Fig. 1
From factory:
• Wherever possible the spacers of the
product should be against a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
possible burn.
Fig. 2
1400mm
1200mm
Wheel Levelling foot
Fig. 3
