After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
9
Fig. 4
Turn the levelling feet clockwise to raise or anticlockwise
to lower the front of the cabinet.
Doors
Electrical connection
•
WARNING!
It must be possible to disconnect the appliance from the mains power
supply; the plug must therefore be easily accessible after installation.
•
Before plugging in your new fridge, let it stand upright for at least 4 hours.
This will allow the refrigerant gases to settle into the compressor and reduce the
possibility of a malfunction in the cooling system.
• The appliance must be earthed. The plug of the power supply cord is equipped
with a contact for this purpose. Do not under any circumstances cut or remove the
third (earth) prong from the power cord. If the plug does not fit your outlet, please
consult a licensed electrician for advice to have the outlet changed.
• Plug the unit into a dedicated, properly installed and earthed wall outlet. Ensure
that your outlet voltage and circuit frequency correspond to the voltage stated on
the appliance rating label.
• Secure the power supply cord behind the unit. Do not leave it exposed or dangling
to prevent injury and accidental disconnection from the power supply.
Installation (Cont.)
• To move the unit, tilt it slightly backward onto its wheels.
• To level the unit, adjust the levelling feet at the base of the cabinet (Fig. 4).
