English
- 55 -
First Time Installation
IMPORTANT: Ensure that the aerial is connected
and a Common Interface module is not inserted
before switching on the TV for the first time
installation.
• When the TV is operated for the first time, the
installation wizard will guide you through the
process. First, the language selection screen will
be displayed:
• Use “ ” or “ ” buttons to select your language
and press
OK
button to set the selected language
and continue.
• After selecting the language, “
Welcome!
” screen will
be displayed, requiring you to set
Country, Search
Type, Teletext Language and Scan Encrypted
options.
• By pressing “ ” or “ ” button, select the
country
you want to set and press “ ” button to highlight
Search Type
option. Use “ ” or “ ” to set the
desired search type. Available search types are
digital only, analog TV only and full.
• When set, press “ ” to select
Teletext Language
.
Use “ ” or “ ” to select the desired
Teletext
Language
.
• Press
OK
button on the remote control to continue
and the following message will be displayed on the
screen:
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press
OK
button.
Afterwards, the following OSD will be displayed on
the screen:
If you select
CABLE
option, the following screen will
be displayed:
You can select frequency ranges from this screen. For
highlighting lines you see, use “ ” or “ ” button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When finished, press
OK
button to start
automatic search.
If you select
AERIAL
option from the Search Type
screen, the television will search for digital and
analogue TV broadcasts.
