20
21
AMD20
● Press the SETUP button (17).
● Press the arrow buttons (left and right) (19) to select a menu.
The submenu is displayed directly.
● Press the arrow buttons (up and down) to enter the submenu.
● Press the ENTER button (24) to select a setting, or the left arrow button to
cancel the selection.
● Press the SETUP button to store the settings and exit.
General setup page
● In the TV DISPLAY section, press the arrow buttons to select 4:3
PANSCAN or 4:3 LETTERBOX for a conventional TV set. Select 16:9 or
WIDE SQUEEZE for a wide screen TV set.
● In the ANGLE MARK section, press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance shows the angle
mark when multi-camera angles are available.
● In the OSD LANG section, press the arrow buttons to choose the
language.
● In the CLOSED CAPTIONS section, press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance shows hidden text
when it is available.
● In the SCREEN SAVER section, press the arrow buttons to switch the
screen ON or OFF.
● In the LAST MEMORY section press the arrow buttons to switch this
function ON or OFF. When switched ON, the appliance remembers the
disc's last playback time.
Audio setup page
Analog audio setup
● DOWNMIX: Select LT/RT to mix 5.1-channel audio into left channel and
right channel. Select STEREO to mix 5.1 channel audio into signal stereo.
i
This function is only available for Dolby AC-3 encoded 5.1-channel
discs.
Digital audio setup
DIGITAL OUTPUT
● Select SPDIF OFF to switch off the digital audio signal output.
● Select SPDIF RAW to set the digital audio signal output to its raw format
(DTS/Dolby Digital 5.1).
● Select SPDIF PCM to set the digital audio signal output to PCM format.
i
When SPDIF PCM is set, the LPCM OUT feature sample rating for
the analog audio input (48 kHz or 96 kHz).
Dolby digital audio setup
DUAL MONO
● Stereo: both channels as is. STEREO is the default setting.
● L-Mono: left channel only.
● R-Mono: right channel only.
● Mix-Mono: the average of both the left and right channel.
i
This function is only available for Dolby AC-3 encoded 2-channel
discs.
DYNAMIC
● Select the value for the dynamic range compression to avoid losing sound
details resulting from a low volume.
High Definition Compatible Digital (HDCD)
● Select the value (2x, 1x or OFF) for full sound richness of HDCD-encoded
CDs.
Video setup page
VIDEO OUTPUT
● OFF: Select S-Video mode of the S-Video connection.
● YUV: Set the video output in analog component video format.
● P_YUV: Set the video output in progressive YUV signals.
● RGB: Set the video output in RGB format when SCART output is used.
