GB- 8
TV OPERATION
Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After a few seconds the TV screen will light up. Should white
dots appear on the screen the TV will require tuning into the available TV stations in your area.
Pre-setting the TV stations into the Memory
(Note: Preset tuning can only be carried out in TV Mode)
1. Press MENU button to see main MENU.
2. Press the VOL button / to select TUNE mode as shown in figure 1.
AUTO SEARCH
1. Press the CH button to select the AUTO SEARCH (auto memory store) mode
as shown in figure 2.
2. Press the VOL button
to start the automatic scanning processes, the on air
stations will automatic store into memory as shown in figure 3.
•
When scanning is completed, the set will tune to lowest program and show
lowest program number on the screen.
•
If want to stop auto search function, press the MENU button.
•
Press the CH button to select the SKIP and press VOL
/ to select on or off,This function use for delete some
unwant channels.
SEARCH
(manual)
1.
Press MENU button.
2. Press the VOL / to select TUNE
3.
Press the CH or button and select SEARCH.
4.
Press the VOL or button to start searching up or down the frequency.
5.
When a TV station is located, the station will show.
6.
Press CH / button until Program shows.
7.
Press the VOL / button and select which position.
To store the TV station i.e BBC1=1, BBC2=2 and so on.
8.
To store the station, press the CH / button until Store shows. Now press the VOL button to store the station.
Repeat 2 to 7 above and store the remaining TV channels in your area.
PICTURE
1. Press the MENU button to see main MENU.
2. Press the VOL button / select the PICTURE mode .
3. Press the CH button / to select the BRIGHTNESS / COLOUR / CONTRAST /
SHARPNESS as show in figure 4.
4. Press the VOL button / to adjust the level of currently selected item, The steps
can be adjust from 0 ~ 63 .
TIMER
1. The TV can switch ON/OFF the power automatically by the following procedure.
2. Press the MENU button to main MENU.
3. Press the VOL button to select the TIMER mode, press the CH button to adjust
the clock time as shown in figure 5 .
4. Press the VOL button / to adjust the hour time 1 7 : _ _ ;
Press the CH button to select the minute 1 7 : 0 0 ;
Press the VOL / to adjust the minute time 1 7 : 3 0 .
5. Continue press the CH and VOL button / to set the
ON TIME _ _ : _ _ . ON PROG. OFF TIME _ _ : _ _ .
•
To make the timer function effective, the TV must set to standby mode, after process is completed.
FIG .2
5
6
AUTO SEARCH
BRIGHTNESS 30
3
FIG .4
CLOCK _ _ : _ _
5
FIG .5
6
PICTURE TIMER SETUP TUNE
FIG .1
VHF - L
STOP MENU
FIG .3
