13
-
Avoid spilling liquids on the remote.
-
Avoid dropping or otherwise jarring the remote.
-
Always store the remote control at dry and normal room temperature place.
-
If the remote is nor performing satisfactorily, replace the batteries. The batteries should be replaced
after one year.
-
If the remote control will be idled for a long time (above 1 month) take out the batteries to avoid
leakage from the batteries.
-
Clean up the entire remote control especially the battery compartment if any leakage found.
-
Do not mix using different kind of new and used batteries together to avoid leakage.
Care For Remote Control
4. Connect Accessory Devices
Connecting a DVD player or other equipment
Switch off LCD TV and external equipment before con-
necting cables.
1. Connect a DVD player or other equipment’s
Component Video Out (Y,Pb,Pr) to the LCD TV’s
corresponding Component In (Y,Pb,Pr) terminal.
(Fig.1)
2. Connect a DVD player’s Audio Out to the TV
Component L/R terminal.
3. Press Power to turn on the LCD TV. Turn on
external equipment also.
4. Press Source to select COMPONENT signal
source.
DVD or other equipment
Audio Amplifier
Connecting a Audio Amplifier
Switch off TV and external equipment before connecting
cables.
1. Connect to the LCD TV ’s Coaxial Out to the
Audio Amplifier Coaxial In terminal by a coaxial
cable. (Fig.2)
2. Press Power to turn on the TV. Turn on external
equipment also.
3. Press Source to select DVD signal source, and set
the Audio Amplifier to coaxial input mode.
4. When DVD is playing, you can enjoy coaxial
digital audio by Audio Amplifier.
Red
White
Red
Green
Blue
Fig.1
Fig.2
