background image

6

HANDLING COMPACT DISCS
1. This unit is designed to play compact discs bearing the identifica-

tion logo to the right. Discs that do not carry this logo may not
conform to the CD standard and may not play properly.

2. Dirty, scratched or warped discs may cause skipping or noise.

Pay attention to the following: Handle the disc only by the edges.
To keep the disc clean, do not touch the surface of the disc.

3. Discs should be returned to their cases after use to avoid serious scratches that

could cause the laser pickup to skip.

4. Do not expose discs to direct sunlight, high humidity, or high temperatures for

extended periods. Prolonged exposure to high temperatures can warp the disc.

5. Do not stick or write anything on either side of the compact disc. Sharp writing

instruments, or the inks used in some felt-tip pens, may damage the surfaces of
the disc.

6. Always place the compact disc to the in the CD compartment with the label fac-

ing upward. CD can be played on only one side.

CLEANING DISCS
1. Fingerprints should be wiped from the surface of the disc

with a soft cloth. Unlike conventional records, compact
discs have no grooves to collect dust and microscopic
debris, so gently wiping them with cloth should remove
most of the particles. Wipe in a straight motion from the
inside to the outside of the disc.

2. Never use such chemicals as record cleaning sprays, anti-

static sprays, benzene or thinner to clean compact disc.
Such chemicals can damage the plastic of the disc.

• The unit will not play a disc that has been inserted upside down, or discs that do

not conform to the Compact Disc standard. Also, the unit might not play discs
that are scratched, soiled or carry fingerprints.

• Both 8cm and 12cm discs can be played in this unit.

TECHNICAL SPECIFICATIONS

CD PLAYER SECTION
Frequency response

20Hz-20KHz

Wow and flutter

below measure limits

Sampling frequency

44.1KHz

D/A converter

1-bit

Error correction method

CIRC

Pick-up

optical 3-beam semiconductor laser
(780 nM wavelength)

GENERAL
Power supply DC

3V using two “AA” batteries
AC/DC adaptor 220V - 4.5V

Dimensions

142mm(W)x134mm(D)x29mm(H)

Weight

212 grams

Note: Specification and the design are subject to possible modification without no-
tice due to improvements.

COMPACT

DIGITAL AUDIO

Summary of Contents for PD-X2240









Reviews: