Page iii
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
This equipment is fitted with an approved non-rewireable UK mains plug.
To change the fuse in this type of plug proceed as follows:
1) Remove the fuse cover and old fuse.
2) Fit a new fuse which should be a BS1362 5 Amp A.S.T.A or BSI approved type.
3) Refit the fuse cover.
If the AC mains plug fitted to the lead supplied with this equipment is not suitable for
your type of AC outlet sockets, it should be changed to an AC mains lead, complete
with moulded plug, to the appropriate type. If this is not possible, the plug should be
cut off and a correct one fitted to suit the AC outlet. This should be fused at 5 Amps.
If a plug without a fuse is used, the fuse at the distribution board should NOT BE
GREATER than 5 Amp.
PLEASE NOTE:
THE SEVERED PLUG MUST BE DESTROYED TO AVOID A
POSSIBLE SHOCK HAZARD SHOULD IT BE INSERTED
INTO A 13 AMP SOCKET ELSEWHERE.
The wires in this mains lead are coloured in accordance with the following code:
GREEN and YELLOW
— EARTH
BLUE
— NEUTRAL
BROWN
— LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, please proceed as
follows:
The wire which is coloured GREEN and YELLOW must be connected to the
terminal which is marked with the letter E or with the safety earth symbol
or
coloured GREEN or coloured GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
THIS APPARATUS MUST BE EARTHED
Ensure that all the terminals are securely tightened and no loose strands of wire
exist.
Before replacing the plug cover, make certain the cord grip is clamped over the
outer sheath of the lead and not simply over the wires.
6D-En
Summary of Contents for RE32
Page 10: ...Page ix ...
