manualshive.com logo in svg

Akai RE32, Operator'S Manual

The Akai RE32 Operator's Manual is a comprehensive guide that ensures seamless user experience with this exceptional product. Offering step-by-step instructions, troubleshooting tips, and advanced features, this manual is available for free download at 88.208.23.73:8080, providing users with easy access to unlock the full potential of their Akai RE32.

Share
Download
background image

84

Version 1.00

SINGLE-MACHINE EDITING

NUDGING IN/SYNC/OUT TIMES

This allows you to use the DATA ENTRY +/- keys to slip and nudge edits or audio into position. The
NUDGE function is accessed from the second group of edit functions shown when the MORE (F6)
key is pressed on the main SINGLE MACHINE EDIT page. Pressing MORE (F6) followed by
NUDGE (F3) will display this screen:

This is a graphic representation of what is happening when you nudge. This page allows you to
nudge the NOW time into position prior to marking an IN, SYNC or OUT time. For example, if you
cannot set an edit precisely using the JOG wheel, you can use this page to nudge the NOW time
into position using the DATA ENTRY +/- keys which will nudge the NOW time, frame by frame, until
it is at exactly the right position. Typically, you would use this by roughly jogging over an edit point
using the JOG wheel, pressing NUDGE and use the + or - keys to nudge backwards or forwards in
increments of frames, maybe use PLAY TO and/or FROM to audition the point and then mark an
IN, SYNC or OUT point as appropriate.

You can also hold down the SHIFT key while pressing the DATA ENTRY +/- keys to nudge in
increments of sub-frames (however, please see below - NUDGE SET - as you can set the increments
by which the NOW time will be nudged).

You may also use NUDGE with SELECT Q to set the SYNC point at which you mark the cue. Line
up the cue you are interested in on the NOW time and press NUDGE. Now use the +/- keys to
nudge the NOW time and, when you’re happy with the position, press SELECT Q. The cue will be
selected and the SYNC point will be marked on the NOW time you have just set.

NUDGING AUDIO

It is also possible to physically nudge and slip audio into position using the NUDGE function.
Pressing F5/F6 gives this screen:

To nudge audio (that is, to physically slip it in time), you must first select and IN and OUT region.
This may be done before or after entering NUDGE AUDIO. Assuming the appropriate tracks are
selected for EDIT, this can be done in a number of ways...

To select a single cue for nudging, line the cue you wish to nudge onto the NOW time and press
SELECT Q. The cue will be highlighted green on the external monitor. For stereo cues, select the
tracks for edit as necessary.

To select a specific IN and OUT region to nudge, mark the IN and OUT points where necessary.
The edit region will be highlighted green on the selected track. You may also select several tracks.

To select everything from the NOW time to the end of the track to nudge, press and hold the IN key
and press OUT. Everything from the NOW time to the end of the track will be selected and highlighted
green on the external monitor. You may do this across several tracks.

To select everything from the NOW time to the start of the track to nudge, press and hold the
OUT key and press the IN key. Everything from the NOW time back to the start of the track will
be selected and highlighted green on the external monitor. You may do this across several
tracks.

Summary of Contents for RE32

































































































































































































Reviews:

No comments

Related manuals for RE32

Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Brand: Eaton Pages: 2
Eaton i-on30R Installation Instructions preview
i-on30R
Brand: Eaton Pages: 2
Eaton MEMSHIELD 4 Installation Instructions Manual preview
MEMSHIELD 4
Brand: Eaton Pages: 8
janitza 800-CT8-A User Manual And Technical Data preview
800-CT8-A
Brand: janitza Pages: 58
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Brand: National Instruments Pages: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Brand: National Instruments Pages: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Brand: National Instruments Pages: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Brand: National Instruments Pages: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Brand: National Instruments Pages: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Brand: National Instruments Pages: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Brand: National Instruments Pages: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Brand: National Instruments Pages: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Brand: National Instruments Pages: 20
National Instruments NI 9234 Getting Started preview
NI 9234
Brand: National Instruments Pages: 9
National Instruments FIeldPoint FP-AO-200 Operating Instructions Manual preview
FIeldPoint FP-AO-200
Brand: National Instruments Pages: 13
National Instruments NI 9205 Getting Started Manual preview
NI 9205
Brand: National Instruments Pages: 26
National Instruments FieldPoint FP-1000 Operating Instructions Manual preview
FieldPoint FP-1000
Brand: National Instruments Pages: 12
National Instruments NI 9264 Getting Started Manual preview
NI 9264
Brand: National Instruments Pages: 20

Brands by name

Popular brands

Load more brands