PLAYBACK
Fig. 13
Fig. 14
Tape (Outside)
Fig. 15
For playback of recorded tapes connect the Line outputs to
the tape inputs of your stereo amplifier and connect a pair
of speakers to the amplifier. Connect power cord and load a
pre-recorded tape.
STEREO PLAYBACK
(A) Turn on Power Switch.
(B) Set Track Selector to STEREO position.
(C) Set Tape Speed Selector and Equalizer .to desired
speed.
(D) Set Playback/Record Lever to PLAY position to begin
playback.
(E) Adjust external amplifier controls.
MONAURAL PLAYBACK
Only the left channel amplifier is used for monaural
playback. Connect the left line output to the left tape input
of the external amplifier. Substitute the following for step
B of stereo playback procedure and add step F.
Tracks 1 and 4
(B) Set Track Selector to 1-4 TRACK position.
(F) Depress Manual Reverse Buttonr^ülor invert reels for
playback of track 4.
Tracks 3 and 2
(B) Set Track Selector to 3-2 TRACK position.
(F) Depress Manual Reverse Buttonf-^lor invert reels for
playback of track 2.
♦ The output level of this model is 1.23 V. Check your amplifier
for proper connection.
AUTOMATIC REVERSE PLAYBACK
One of the main features of this model is the automatic
reverse playback mechanism which eliminates troublesome
inverting of reels by hand. Simple application of a piece of
sensing foil to the tape at the desired reversing points is all
that is necessary for continuous playback in both direc
tions.
(A) Affix about a 2 cm (3/4") long piece of sensing foil to
the outside of the tape at desired reversing point.
(B) If continuous reverse between two points is desired,
affix another piece of sensing tape to the inside of the
tape at desired reversing point.
As the foil passes the sensing poles, reverse is effected.
MANUAL REVERSE PLAYBACK
This model is also equipped with Manual Reverse Buttons
for your convenience. To effect manual reverse, depress
Manual Reverse l-^Él or Normal Play 1^-1 Button.
s
Sensing Tape
Sensing Pole
Sensing Pole
Sensing Tape
