82
Chapter 10—Using FX
Z4/Z8 User Guide—Version 1.0
FX Types
See page 79 for selecting FX types, and page 81 for editing FX.
FX Type
Description
Chorus>Mono
This is a standard chorus effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
Chorus>Stereo
This is a stereo chorus effect that adds width and spread to
the stereo image.
Chorus>Xover
This is a variation of the STEREO CHORUS. The feedback from
each channel is fed to the other channel.
Delay
This effect consists of a chorus effect and a delay effect con-
nected in series.
Compressor/Limiter
This monaural effect suppresses signals with a certain level or
higher and limits the dynamic range. It also provides a noise
gate that cuts noise during silence.
Delay>Mono
This is a standard delay effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
Delay>Multi Tap
This delay effect creates a special effect by adjusting the
interval between feedback sounds and the level change
curve of the feedback sounds.
Delay>Panning
This delay effect pans the delay sound left, center, then right
(LCR), or right, center, then left (RCL).
Delay>Ping Pong
This delay effect pans the effect sound left and right.
Delay>Stereo
This delay effect can be set for the left and right channels
individually.
Delay>Xover
This is a variation of the STEREO DELAY. The feedback from
each channel is fed to the other channel.
Digital EQ
This is a monaural, three-band parametric equalizer.
Distortion
This monaural distortion effect distorts input signals. An equal-
izer is connected to the effect in series.
Enhancer
This monaural effect enhances sounds by adding new over-
tones.
Expander
This monaural effect limits signals at a certain level (thresh-
old) or lower and expands the dynamic range, providing an
effect opposite to the compressor effect.
Flanger>Mono
This is a standard flanger effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
Flanger>Pan
This effect adds an auto panning effect to the mono flanger.
Flanger>Stereo
This is a stereo flanger effect that adds width and spread.
Flanger>Xover
This is a variation of the STEREO FLANGER. The feedback from
each channel is fed to the other channel.
Delay
This monaural effect consists of a flanger effect and a delay
effect connected in series.
Noise Gate
This monaural effect mutes signals at a certain level (thresh-
old) or lower. This is useful for cutting noise during silent parts
of a performance.
Pan>Auto Pan
This auto pan effect automatically rotates the stereo image
of the sound left and right. It also adds depth of rotation.
Pan>Trigger Pan
This auto pan effect becomes enabled when the output
level of one of the AUX Sends A–D exceeds a certain level.
You can also start the auto pan effect manually.
Phaser>Mono
This is a standard phaser effect with mono-in and mono-out.
You can adjust the pan setting of the effect sound.
Phaser>Pan
This effect adds an auto panning effect to the phaser effect
sound.
Phaser>Stereo
This is a phaser effect that adds width and spread to the ste-
reo image.
Phaser>Xover
This is a variation of the STEREO PHASER. The feedback from
each channel is fed to the other channel.
Summary of Contents for Z4
Page 106: ......
