Operating Manual JUPITER 100J & 150J
12 (28)
JUPITER 800/900 100J & 150J
Document-ID: 948681-000
Version: A2
Author: SH
EN
INSTRUCTIONS FOR CRANE OPERATORS
These instructions have to be followed.
!
Check that the radio transmitter operates on the crane that you are going to
operate (ex. give a signal). Check all functions of the radio transmitter.
!
Check that no unauthorized person is on or near the crane when you start to
operate it. Any blocking device at the entry of the crane should be closed.
!
Check the position of the symbols for operating direction (crane-trolley-
travel).
!
At the beginning of each shift the crane operator is to test all brakes, limit
switches and emergency stop functions as well as the STOP button on the
transmitter.
!
The crane operator should when operating the crane stand at a suitable
distance from the crane hoist in order to have adequate overview of the
operation.
!
It is prohibited to move the crane load over oneself or coworkers. Signal in
order to warn others.
!
Avoid driving into end stops since equipment and goods can be damaged.
!
Check your own free passageway in order to avoid tripping over material
on the ground when you operate the crane. Keep the workplace in good
order.
!
If you loose control of the crane movements, release the joysticks to obtain
the zero position in order to stop the crane. If the crane still does not stop,
actuate the STOP function.
