Fig. 7: Bending the
headband and temple
pieces to fit.
Refer to fig. 7.
4
4..3
3 A
Ad
djju
ussttiin
ng
g tth
he
e
M
Miiccrro
op
ph
ho
on
ne
e A
Arrm
m
Fig. 8/1, 2, 4: Adjusting
the microphone arm.
Refer to fig. 8/1.
Refer to fig. 8/2.
Refer to fig. 8/4.
•
Hold the headband or temple piece firmly at the points
marked in fig. 7 and bend inward with extreme care.
•
Check whether the microphone fits better. If it does not,
bend the wire some more, again with extreme care.
1. Hold the temple piece firmly with one hand and lever the
guide bush on the microphone arm out of the holder with
the other hand.
2. Hold the microphone arm by the cable grip and shift the
guide bush. The position of the guide bush sets the longitu-
dinal distance between the
microphone and mouth.
3. Press the guide bush back
into the holder.
4. You can adjust the lateral
distance between the mi-
crophone and your cheek
by turning the microphone
arm by the cable grip or by
cautiously bending the microphone arm.
4 Using Your Microphone
AKG HC 577 L
21
1
2
4
