AKG Technology, Inc. (
http://www.akgtech.com
)
Tele:
(909)967-5572;
Fax:
(909) 580-8228;
Email:
engineer@akgtech.com
Mailing Address: 1225 Benito Avenue, #M, Alhambra, CA 91803, U. S. A.
10 - 11 LCD Open frame SAW Touch Monitor
LCD Type
19
＂
Active matrix TFT-LCD
Active Area
14.8
＂
(376.3mm)×11.9
＂
(301mm)
Monitor Dimensions
Width
: 432mm
Width with bracket
: 472mm
Height
: 351mm
Height with bracket
: 391mm
Depth
: 47mm
Suggested Resolution
1280×1024
Supported Resolution
1280×1024 at 60,75 Hz;
1024×768 at 60,70,75 Hz;
800×600 at 60,72,75 Hz;
640×480 at 60,72,75 Hz;
640×400 at 70 Hz
Support Colors
16.2M
Pure LCD Panel
300cd/m
2
Brightness(Typical)
With SAW Glass Sensor
275cd/m
2
Response Time(Typical)
8ms
Horizontal(left/right) 75°/75°
Viewing Angle
(Typical at CR
＞
10)
）
Vertical(up/down) 75°/60°
Contrast Ratio(Typical)
700:1
Video Input
Analog RGB
Signal Input
H/V Separate Sync. (TTL)
Video Signal Input
Connector
Mini D-Sub 15-pin VGA
Frequency
（
H/V
）
30
～
80KHz / 60
～
75Hz
Power Supply
Type: External brick
Input (line) voltage: 100-240 VAC, 50-60 Hz
Output voltage/current: 12 volts at 4 amps max
Operating Temp.
0
～
50°C
Storage Temp.
-20
～
60°C
Operating RH:
20%
～
80%
Environment
Storage RH:
10%
～
90%
MTBF
50,000 Hours
LCD Back light Life(Typical)
50,000 Hours
Weight
（
N.W/G.W
）
5.8Kg / 8 Kg
Power Consumption
50W Max.
Mount Interface
1)VESA 75mm and 100mm
2)Mount bracket, horizontal or vertical
(Standard mount brackets are supplied)
Buttons AUTO,+,POWER,-,MENU
OSD Control
Function
Brightness, Contrast Ratio, Auto-adjust, Phase,
Clock, H/V Location, Languages, Function, Reset
Touch screen Type
KAL-0190-4B: 19” SAW 4MM thickness of touch screen sensor
(Available Options: Thickness/Anti-glare/Tempered)
Touch System Interface
Having USB and serial interface
