AKG Technology, Inc. (
http://www.akgtech.com
)
Tele:
(909)967-5572;
Fax:
(909) 580-8228;
Email:
engineer@akgtech.com
Mailing Address: 1225 Benito Avenue, #M, Alhambra, CA 91803, U. S. A.
6 - 11 LCD Open frame SAW Touch Monitor
(4) Calibration
Find “
calibration
” from
UPDD
in
All programs
and complete the calibration for your touch system at the
first time of touch system integration and every time you changed the touch screen sensor or controller.
Chapter
3
3
OPERATION
3.1 About Touch monitor Adjustments
Your touch monitor will not likely require adjustment. Variations in video output and
application may require adjustments to your touch monitor to optimize the quality of the
display. For best performance, your touch monitor should be operating in native resolution,
that is 1280
×
1024 at 80k-75 Hz. Use the Display control panel in Windows to choose 1280
×
1024 resolution. Operating in other resolutions will degrade video performance. For further
information, please refer to Appendix A.
All control adjustments are automatically memorized. This feature saves you from having
to reset your choices every time you unplug or power your touch monitor off and on. If there
is a power failure, your touch monitor settings will not default to the factory specifications
3.1.1 Rear Panel Controls
