Congratulations on the purchase of your new
BookletMac
, a professional and heavy-
duty booklet making machine. Your
BookletMac
was designed with a full range of
function and premium quality components to guarantee you an effortless and professional
job, as well as many years of trouble-free services.
We recommend that you take a few minutes to familiarize yourself with the functions
of your new
BookletMac
. You will find that with just a little practice, any person can
achieve professional results.
INTRODUCTION
O P E R AT I O N A L M A N U A L
IMPORTANT
F E AT U R E S
Machine is switched on, but it won’t work at all.
No-Staple light is ON.
Cover is open.
The power cord is not plugged in properly.
Push power cord thoroughly into power outlet.
Close cover.
Re-fill Staples. Follow instructions on Page 5.
Papers are not in Paper-in tray.
Place paper on Paper-In Tray and align to the Left & Right Side Guides.
Staples jam.
Paper Jam.
Machine does not staple although the staple magazines are fully filled with staples.
Staple Pusher is not hinged onto the pin.
Staple Pusher is missing or
incorrectly positioned.
The hole on the Staple Pusher should be hinged onto the pin. Follow
instructions on Page 4.
Follow instructions on Page 4 to put in Staples Pusher. The mark “26”
should be shown towards the rear of the machine and the Stapler
Head latch should be locked.
Missing staples or un-qualified staple output.
Cannot fold or un-qualified booklet fold & staple.
1. Remove jammed staples. Follow instructions on page 4.
2. Always use our 26/6 or 26/8 standard staples.
3. Check if Staples Pusher is scratched or worn out. Follow
instructions on page 4 to put in a new Staples Pusher.
1. To remove jammed sheets, press the “REVERSE” button on control
panel to drive paper backward. You may need to press it a few
times until it stops, then you can pull out jammed sheets.
2. Do not insert more than 20 sheets of 20 lbs paper.
3. Do not insert materials that are too thick or too rigid sheets. Do not
insert materials other than papers.
Black (Dark colored) Covers.
If possible, avoid using black or dark colored covers, as the infrared
sensor may not be able to detect sheets being inserted into the
machine.
Unqualified staples.
Use only our standard 26/6 & 26/8 staples. See page 5.
Incorrect staples type or specification.
Use only our standard 26/6 & 26/8 staples. See page 5.
Stapler Pusher is put in the wrong direction.
The Stapler Pusher should be shown towards the rear of the
machine. See Page 4
Residues inside Stapler Head.
Remove the Stapler Head from the machine, unscrew the front plate
of Stapler Head, clean Stapler Head and re-install the Stapler Head
to the machine. Make sure the Stapler Head latch is locked before
you operate the machine. Follow the instructions on Page 4 to
remove/install Stapler Heads.
Follow the instructions on Page 4 to change Staples Pusher.
Stapler Pusher is scratched or worn out.
Follow instructions on page 3 to set-up the Fold & Staple features
correctly.
Settings for the Fold & Staple features are not
correctly set.
Too many sheets are inserted or the material is
too rigid.
1. Do not insert more than 20 sheets of 80 lbs paper per run.
2. Do not insert materials that are too thick or too rigid sheets. Do not
insert materials other than papers.
Folding line is not located in the center of the
booklet, or is at a slanted angle.
1. Properly adjust the Left & Right Side Guides. If the Side Guides are
too far apart, paper can be unparallel as it is inserted into the
machine. On the other hand, if the Side Guides are set too tightly,
paper can curl up during folding, which results in incorrect
stapling. See Page 6 for instructions.
2. Properly adjust the Paper Depth Adjustment Knob, so the machine
folds in the center of the sheets. See Page 6 for instructions.
Dirty rollers.
Clean rollers by soft and damp cloth. Never use chemical or alcohol
base liquids as they may damage the roller.
The 2 staples are not properly centered in the
booklet.
1. Properly adjust the Left & Right Side Guides. See Page 6.
2. Re-install Stapler Heads to the correct positions. See page 4.
WA R R A N T Y P O L I C Y
Your
BookletMac
has a warranty of one year from date of purchase. In the event of a manufacturer's defect, your
distributor (at option) will repair or replace it. Important: this warranty does not cover damages due to improper use or
miss treatment of the unit, including any extraordinary event leading to the damage of the machine, whether it is
reversible or not. If the
BookletMac
is not working properly, first follow the trouble shooting above. If the problem
persists, please contact your dealer for further instructions. Please have your machine's serial number and the
purchase date ready. If the machine must be returned to your distributor, it is your responsibility to properly pack and
ship it. As any damages incurred during its transportation is not covered by our warranty policy.
Paper-in Tray
PAGE 1
PAGE 8
