17
d.
Use the frontal end datum detection or make the printed mark
■
confirm to set requirement.
e.
If mark
■
detection mode, not recognized due to non-white paper, either use white paper or use
frontal end datum detection.
1.
Bad Paper Feeding
a.
Possible Reason #1: The paper guide plates are too tight on the paper. Use the micro-adjusting nut
to readjust it.
b.
Possible Reason #2: Paper feeding problems may occur in case of improper paper. Please confirm
to the following:
i.
Too thick (over 0.30mm), too thin (below 0.20mm). See “Adjusting To Cut Different Paper
Thicknesses” to adjust paper feeding.
ii.
Too small or too big size of paper
iii.
Too many papers placed. No more than 3mm total thickness and no more over the red
line.
iv.
Excessively curved paper.
WARRANTY
The Akiles Cardmac Pro has a warranty period of 1 year from the date of purchase. In the event of a
manufacturer’s defect, your distributor (at option) will repair or replace it. IMPORTANT: This warranty does not
cover damages due to improper use or mistreatment of the unit, including any extraordinary event leading to the
damage of the machine, whether it is reversible or not.
Summary of Contents for Cardmac Pro
Page 18: ...3 5 x2 ...
Page 19: ......
Page 20: ......
Page 21: ...T e mp l a t eD i me n s i o n sf o r C u s t o m L e n g t hC a r d s ...