7
USE OF THE ROBOT
1.
Remove and open the MINI ADA Social Robot from the carrying crate in accordance
with the instructions.
(See the link for detailed description.)
https://www.akinrobotics.com/tr/robot-e-kilavuz-kategori/on-ekran-
ve-kurulum-bilgileri--2-6
2.
Install your AR-GUI and AR-DESIGNER programs on your computer in order to start
programming steps.
3.
Create the programming steps as follows.
(See the link for detailed description.)
https://www.akinrobotics.com/tr/robot-e-kilavuz-kategori/on-ekran-
ve-kurulum-bilgileri--2-6
4.
Connect to MINI ADA Social Robot via AR-GUI. Program all the movements and
behaviors you want to your robot by following the instructions on this screen
(See the link for detailed description.)
https://www.akinrobotics.com/tr/robot-e-kilavuz-kategori/ar-gui--2-7
5.
You can follow the instructions by using the File/ Create New Design tabs in the section
on the front screen of the robot for the designs you will create for use on the MINI ADA
Social Robot screen.
(See the link for detailed description.)
https://www.akinrobotics.com/tr/robot-e-kilavuz-kategori/ar-
designer--2-8
