18
System Connections
Connecting to a PC
The unit can be connected to PC (personal computer) via the VGA cable. Follow the picture below to
connect:
1.
Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and connect
the other end to the PC.
2.
Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit and
connect the other end to the PC audio output jack.
3.
Set the PC video resolution to match that of the television (typically 1366 x 768@60Hz).
After connection, turn on the power of the unit and the external AV signal source and use the
INPUT
and
the direction buttons to select
VGA
mode, and then press the
OK
button to confirm.
Connecting to CAM
Insert the CAM (Conditional Access Module) into
the DVB-T CI slot on the left side panel of the unit.
Please see the picture on the right:
Please refer to the manual of the
CAM for details.
Summary of Contents for Atome LCT-B21HDU26H
Page 123: ......
