SPECIFICATION FOR PLT-42TT PLASMA DISPLAY VER1.0
2-4
2.4.
Display Performance Requirements:
The data of display performance are measured based on the following.
Conditions unless otherwise specified.
a. Ambient temperature
25
±±±±
5
℃
℃
℃
℃
b. Warm up period
30 minutes Min.
c. Line input voltage :
100 Vac ~ 240 Vac (50 / 60 Hz)
d. Viewing distance
Distance from screen is 81 cm
e. Display mode
Test with window white pattern mode if not specified.
f. Brightness condition
Press recall bottom to set default brightness
2.4.1 Maximum Resolution:
Support to 1280 x 1024
2.4.2 Horizontal Size (Standard)
920
±±±±
8 mm (for mode 1
〜
〜
〜
〜
26)
Vertical Size (Standard)
518
±±±±
8 mm (for mode 1
〜
〜
〜
〜
26)
2.4.3 Horizontal Size (Max.)
Mode 1~26
Ö
Ö
Ö
Ö
full-scan
Vertical Size (Max.)
Mode 1~26
Ö
Ö
Ö
Ö
full-scan
2.4.4 Maximum Brightness Level:
Timing Mode 1
a. 100% center block white
pattern(mosaic)
More than 30FL
(while pressing recall button to set default brightness)
b. raster background
with contrast / brightness at Max. and black signal)
less than 0.4FL
2.5. Operation:
Main unit button
Main power switch (power ON /OFF)
Power ON/OFF
Input Mode (Video1 -> S-Video1 -> Video2 or S-Video2 ->
Y/P
B
/P
R
1 or Y/C
B
/C
R
1 -> Y/P
B
/P
R
1 or Y/C
B
/C
R
1 -> RGB ->
DVI->Video1 run in circle)
Menu key -,+ Adjustment -,+
IR Remote Control
Power on/off
Input Mode (same as Main unit button)
Volume -,+ Wide , Video/S video
input:4:3/16:9/ZOOM1/ZOOM2
Analog RGB input :W4:3/W16:9
Menu -,+ Adjustment -,+ RECALL
PIP ,POP ,SWAP ,MUTE
2.5.1 Adjustable Items:
AV/S-video input
Brightness, Contrast, Color , Tint, Sharpness
Y/CB/CR
Color Temperature
Analog RGB input
DVI input
Display position :
Brightness, Contrast, Vertical position, Vertical width,
Horizontal position, Horizontal width, Color Temperature
Clock phase, DPMS.
Brightness, Contrast, Vertical position, Vertical width,
Horizontal position, Horizontal width, Color Temperature,
DPMS
3. DIMENSIONS:
Without/Stand
With/Stand
All manuals and user guides at all-guides.com
