2
Acoustic signalling
Short beep after pressing and releasing PTT.
It is possible to disconnect acoustic signalling only at the supplier.
Optical signalling
Beginning of real transmission is indicated by red LED on front side of the speaker microphone. Real radio
transmission indicated by red LED can start short time after pressing PTT due to busy radio network.
Yellow button function
There is a yellow button on the top of the speaker microphone.
WHITE LAMP
– Yellow button has a lamp (torch) function. Intensive white light lights up on front side of the
speaker microphone for seven seconds after pressing yellow button.
Optical signalling suppression
It is possible to suppress red LED signalling PTT when user requires discreet operation in darkness.
Optical signalling suppression settings:
1.
Switch off the radio and connect MR 07 to rear radio connector.
2.
Press and hold yellow button and switch on the radio. Hold yellow button until white LED lights up. Red LED
optical signalling is suppressed now.
3.
PTT optical signalling is active again by repeating that procedure.
Mode settings is not changed by standard switching on and off the radio.
Note: Optical signalling is automatically suppressed when the radio is in silent mode.
6 technical specification
Product name:
Speaker microphone G2 MR 07
Product labelling:
MR 07
– W
Yellow button function - WHITE LAMP
Power supply:
3,3 V from radio connector
Speaker:
8 Ω / 1 W
Microphone:
electret, omnidirectional
Operating temperature:
-20 to +55 °C
Dimensions:
62 x 72 x 35 mm
Weight:
195 g
Advice for users of this product!
This symbol indicates that electrical and electronic
equipment must be disposed of
separately from municipal trash at the end of its
operational lifetime. When the
device has become unusable, dispose of it in
accordance with the current
statutory regulations
