3
Before commissioning
WARNING!
Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read
and understood the following documents:
-
Operating instructions
-
All the operating instructions for the system components, especially the
safety rules
-
Battery and vehicle manufacturers’ operating instructions and safety rules
Mains connection
The rating plate, which is located on the housing, contains information about the permit-
ted mains voltage. The charger is designed for this mains voltage only. The fuse protec-
tion required for the mains lead can be found in the „Technical data“ section. If there is
no mains cable or mains plug on your machine, fit one that conforms to national stan-
dards.
NOTE!
Inadequately dimensioned electrical installations can lead to serious
damage. The incoming mains lead and its fuse must be dimensioned to suit the
local power supply. The technical data shown on the rating plate applies.
The charger is only to be used for charging batteries as described in the „Technical data“
section and is intended exclusively for supporting the electrical systems of cars in
showrooms. Any other form of usage is deemed „not in accordance with the intended
purpose“. The manufacturer shall not be liable for any damage resulting from such
improper use. Utilisation in accordance with the „intended purpose“ also includes
-
following all the instructions in these operating instructions
-
regular checking of mains and charging cables
Utilisation in
accordance with
„intended purpo-
se“
WARNING!
Charging dry batteries (primary cells) and non-rechargeable
batteries can cause serious injury or damage, and is therefore prohibited.
Safety
