6
If installing the charger on a firm base, use drilling template enclosed in the packaging.
NOTE!
Protection IP44 is only guaranteed for the upright position.
If the charger is installed in a switch cabinet (or a similar sealed area), then
forced-air ventilation must be provided to ensure adequate heat dissipation.
There should be a clearance of 10 cm (3.94 in.) all around the charger.
The space requirement measurements in mm (inches) illustrated below are given to
ensure that there is easy access to the plug connections:
Fig. 8 Space requirements
Fig. 7 Removing display and covers
If necessary, use a screwdriver to remove:
-
Display (14)
-
P3 connection cover (17)
Visual port
-
P4 connection cover (18)
multiport
-
P2 connection cover (19)
I/O port
(17)
(14)
(18)
Removing the
cover
Assembly
(19)
270 (10.63)
168
(6.61)
100 (3.94)
15.5 (.61)
