9
Hour ->year ->week -> day -> month ->sampling
->second ->minter ->hour -.>year ……..
Press MAX/MIN key to add object of setting
Press HOLD key to reduce the object of seting
Hold key of MEM/SETUP and UNITS to exit the setting
time and sampling mode, and then confirm .
15. MEM function:
Press key of MEM/SET to save the present
data.
HOLD key of LOAD 5s start to load the records
Press key of MAX/MIN to add the number of records.
Press key of HOLD to reduce the number of records.
After you do that you must hold the key of LOAD 5s to
resume normal operation .
16. DATALOGGER function:
SETUP the time and sampling rate first, the default
sampling rate is 1s.
Hold the key of MEM/SETUP 5s, start the datalogger
function, the MEM on the screen will be bicker. If the
memory IC is full ,the memory number will show ‘OL’.
Press the key of MEM/SETUP 5s , stop the datalogger
function , then the meter will resume normal operation.
Then the datalogger number will return to 1, you could
start your records again.
