SAFETY WARNINGS
The following safety information must be observed
to insure maximum personal safety during the
operation at this meter:
x
Do not use the meter if the meter or test leads
look damaged, or if you suspect that the meter
is not operating properly.
x
Use caution when working above 60V dc or 30V
ac rms. Such voltages pose a shock hazard.
x
When using the probes, keep your fingers
behind the finger guards on the probes.
x
Measuring voltage which exceeds the limits of
the multimeter may damage the meter and
expose the operator to a shock hazard. Always
recognize the meter voltage limits as stated on
the front of the meter.
x
If the equipment is used in a manner not
specified by the manufacturer, the protection
provided the equipment may be impaired.
2
Summary of Contents for AMM-1009
Page 1: ......
