Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: info@aktobis.de
Insructions for use:
1. Operational environment
-
The maximum operating temperature should not 40°C !
-
The maximum relative humidity should not exceed 90% !
-
The unit should not be operated at altitudes higher than 1,000 metres above sea level!
2. Commissioning
2.1. Set up the blower so that the air stream flows in the desired direction after switching
on. Please note that the exhaust side of the fan is on the left-hand side when looking
at the on/off switch and the intake side is on the right-hand side when looking at the
on/off switch!
2.2. Now insert the mains plug properly into the socket.
2.3. The fan is switched on by a toggle switch (ON/OFF) located on the side of the unit.
O
=
OFF
I
=
ON
3. Connection of air hoses or a dust bag
This blower has a practical plastic nozzle at the front and back. You can connect an air
hose with a diameter of 30 cm to this either in the process (air is sucked in from a targeted
location) or in the aftermath (air is transported to a targeted location).
Alternatively, you have the option of attaching a dust collection bag in the exhaust air area.
The blower can then be used as a practical air hoover. Construction dust, for example,
can then be collected quickly for the most part.
A suitable dust bag is available from us as an accessory.
