6. Connections.
Source/ Input Menu.
10
To access the Source menu, press the SOURCE button on the Remote Control
or the INPUT button on the TV.
Using the
▲
/
▼
buttons select the Source / Input required and press OK to
select.
7. Menu Operation.
Connect the TV/DVD to the Mains adaptor and suitable aerial. It is advisable not to connect other
apparatus until you have established that the TV is working correctly. If using the TV for DVBt (Freeview)
viewing the existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the
received stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not
sufficient.
Turn on the power and a Red led will be displayed in the lower right corner.
Press either the Standby button on the remote control or the Power button on the TV.
The led will now turn Green and the screen will light up after approx 5 seconds.
At this stage no stations will be stored.