10
Source/ Input Menu.
7. Connections.
9
To access the Source menu, press the SOURCE button on the Remote Control or the INPUT
button on the TV.
Using the
▲
/
▼
buttons select the Source / Input required and press OK to select.
Connect the TV to the Mains supply and suitable aerial. It is advisable not to connect other apparatus until
you have established that the TV is working correctly. If using the TV for DVBt (Freeview) viewing the
existing aerial may not be suitable. Indoor aerials (set top) may not be suitable for some of the received
stations. If stations are missing, freeze or break up, it is certainly the aerial signal that is not sufficient.
Turn on the power and a Red led will be displayed in the lower right corner.
Press either the Power button on the remote control or the Power button on the TV.
The led will now turn Green and the screen will light up after approx 5 seconds.
At this stage no stations will be stored.
8. Menu Operation.
10