CD OPERATION
Page 10
Operating CD
1 Switch to “CD” mode.
2 Press “ ” button once to open CD tray.
• Place the disc with label facing up on the disc tray.
• Hold the disc without touching either of its surface position with printed
title side facing up, align it with the guides and place it
• To expose the third disc holder, press the “DISC-CH” button.
in its proper
position.
3
4
Press again “ ” button to close the CD tray.
Press the “DISC-CH” button to select the CD number you require.
5 Press “Play” Disc plays automatically.
6 Stopping play.
Press “Stop” button once to stop play.
• If you press the “play” button again, play starts automatically from first track.
Skip and Searching
Next or Back Button:
Press these buttons to go to the previous / next track.
Repeat
-The repeat functions that you can enjoy are dependent on the disc types played
CD: All tracks repeat, single track repeat and given disc
1 Press repeat key once.
2 LCD will display “Repeat 1” .
3 Indicating repeat play of 1 track.
4 Press repeat key twice to repeat whole CD “Repeat 1 Disc” appears on display.
5 Press repeat key again to repeat all 3 discs. “Repeat All Disc” will appear on
the display.
6 Press repeat key again to exit mode.
CD Program
-Befo
-Program mode can only program 1 CD at a time.
re use, be sure to press STOP button.
1 Set CD mode.
2 Press the “PROG” button, the display will show “PROG 00”, moreover, it will
indicate digits for track no.
3 Select a desired track by using the skip buttons.
4 Press the “PROG” button again to confirm desire track into program.
5 Repeat step 2 and 3 to enter additional memories into the program.
6 When ALL the desired tracks have programmed. Press “Play / Pause” button to
play the disc in the order you have programmed.
7 Press “Stop” button to terminal program play.
