R49G Guard Phone Administrator Guide
AKUVOX SMART INTERCOM
www.akuvox.com
17
Automatic date&time:
when you switch on automatic time and date, the time
and date will be automatically synchronized with the NTP server (Network
Time Protocol. You can switch off the function if you want to set up the time
and date manually.
Set date:
set up the date manually when the automatic date& time function is
switched off. However, the date can not be set up manually when the
automatic date&time function is switched on.
Set Time:
set up the time manually when the automatic date& time function
is switched off. However, the time can not be set up manually when the
automatic date&time function is switched on.
Select time zone:
select the specific time zone depending on when the device
is used. The default time zone is GMT+0.00.
Automatic 24-hour format:
switch on this function if you want the time to
displayed in 24-hour format.
Use 12-hour format:
switch on this function if you want to time to displayed
in 12-hour format. However, you cannot set the 12-hour time display if
automatic 24 hour format is switched on.
5.2.2.Time Setting on the Web Interface
You can configure the time setting on the web
Phone > Time/Lang
interface
by setting up the NTP server address that you obtained to automatically
synchronize your time and date for the device. And when your time zone is
selected, the device will automatically notify the NTP server of its time zone
so that the NTP server can synchronize the time zone setting in your device.
Parameter Set-up:
