X933H Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
89
You can unlock the door remotely without approaching the device physically
for the door access by typing the created the HTTP command (URL) on the
web browser to trigger the relay when you are not available by the door for
the door access. To do this configuration on web
Device > Relay > Open
Relay via HTTP
interface.
Parameter Set-up:
Switch:
Enable it to allow the relay to be triggered remotely using HTTP
command.
Username:
Enter the device username to be used as a part of HTTP
command to trigger the local relay.
Password:
Enter the device password to be used as part of HTTP
command to trigger the local relay.
Please refer to the following example:
http://192.168.35.127/fcgi/do?action=OpenDoor&UserName=admin&Passw
ord=12345&DoorNum=1
Note:
DoorNum in the HTTP command above refers to the relay number
#1 to be triggered
17. Lift Control
You can summon lift at home via lift control feature.
Summary of Contents for X933H
Page 1: ...Version 1 0 Date Feb 2021 Version 1 0 Date Mar 2022 ...
Page 17: ...X933H Administrator Guide AKUVOX SMART INTERCOM www akuvox com 7 ...
Page 18: ...X933H Administrator Guide AKUVOX SMART INTERCOM www akuvox com 8 ...
Page 22: ...X933H Administrator Guide AKUVOX SMART INTERCOM www akuvox com 12 ...
