Page 15 av 24
Installation and maintenance Manual Digital CAP
Document no. DC10000877
3.4 Attaching the CAP top
When the connection box is attached properly to the cage
pole(s), and the extension pole is in place, the Digital CAP top
may be attached.
Necessary equipment
- extension pole
- 3mm Umbraco key
- 4 x M6 bolts
- two M6 set screws
- 3mm hex-key
Procedure
1 Open the connection box
2 Tread the pole in the top opening of the connection box
3 Fasten all four bolts (red) to attach the extension pole to the
connection box
4 Close the connection box