ASM
USER’S MANUEL
PAGE: 11
03.04-B1
6.8. THE SITUATION OF THE RISK.
*
The machine is with 3 Rolls.One of the rolls is fixed,the other two rolls are moving.If
they did not use careful,the serious crushing and wounding will be cause.
* In this situation :
Stoping the motor.
*All the electrical connections must be closed,when the machine is cleaning.(Pull the
plug, Close the safety.)
*Don’t pull out the machine safety appliances.Don’t make any changes and correction on
the machine.
IN DANGER SITUATION PRESS THE EMERGENCY STOP BUTTON.
6.9. APPROPRIATE OPERATOR
UNDER 16 YEAR PERSONAL,CAN NOT USE THIS MACHINE (AB-AS REQUIRED CHARTER)
* The user must read the USER MANUEL,before starting the machine to work,and try to
understand the writing.
* If the user is hesitate the situation,absolutely must give the information to producer.
*The machine definitely must using only from the side autorized personal.If the other
personal come near the working place,the operator is responsible for him,from the wound
and damage.
* The machine can work only ,at the closed area. To working the machine at the
explosive containing the gas and burning dangerous areas ,is forbidden.
* The producer is not responsible for the parts and accessories ,which are not original
and using at the time of the repairing the machine.
* When you come near the machine,to fill the need situations,turn the switch button to
‘’0’’.
* At the working necessary time,if you hear the high voice and determine the
damage,stoping the machine and try to search the damage.
6.10.
TO PROTECT THE OPERATOR ONESELF
The operator can not take the special disposition,for the machine using at the normaly
conditions.Nevertheless;
At the working time of the machine,for the hard and sharp material, the operator must use the
steal nose shoes and gloves.According the maintainence and repairment the machine,the
personel which are autorized must have the needed equipments at the wardrobe.
9
Screwdriver set.
9
Tighting set.
9
Key set.
9
Lubrication gun.
9
Gloves, Steal nose shoes.
Summary of Contents for ASM
