AK-AD-33 - user manual
p. 3
Problem
Cause
Solution
A device
Hub does not work
connected to
No USB support
ź
Exit Windows or DOS safe
mode
The Hub is overloaded
ź
Connect an additional power
supply to Hub
There is a suspicion of a
product defect
ź
Stop using and contact the
seller
A
device
connected to
Hub does not charge the
battery or displays a
message about the non-
genuine charger
The Hub does not
correspond to the current
parameters
ź
Connect an additional power
supply to Hub
ź
Contact with seller
Removing the most common problems
USB Hub
Cleaning the Hub
ź
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners and water.
Disconect the Hub from the computer and connected devices before cleaning.
Technical specfication
Product code:
Supply voltage and amperage:
Temperature:
Cable plug:
Connectors:
Power supply connector:
Compilance with standards:
REACH compatibility
EAN code:
AK-AD-33
5V/2A
5-50ºC
USB 3.0
4x USB 3.0
3.5 x 1.35 mm
CE, FCC, RoHS
Yes
590172013
2376
Product manufacturer:
Ropla Computers sp. z o.o.
ul. Wroc
ławska 1c
52-200 Suchy Dwór
