background image

 AK-EC-02 - user manual 

p. 2

Safety Precautions

The manufacturer of the product is not responsible for damage or insults caused in effect 
of disobey the safety instructions and informations contained in these user manual. 

ź

It is forbidden to put fingers or objects in the plug.

ź

Product  and  power  cord  should  not  be  touched  with  moist  or  wet  hands  under  no 
circumstances.

ź

Short-circuiting the current connection is prohibited.

ź

In case of any doubts regarding operation, safety or connection of the product, please contact 
the manufacturer or a qualified specialist for this purpose.

ź

Keep  the  product  and  the  packaging  out  of  range  of  children  and  animals.  The  package 
includes a foil that child could choke while playing.  

ź

The product is intended for private use only. Before using the public charging station, read its 
regulations. 

ź

It is forbidden to insert wet plugs into electrical outlet and the vehicle charging port.

ź

If the product has been damaged, does not work properly or has been stored for a long period 
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is 
essential to stop using the product and to protect it against re-use for security purposes.

ź

All maintenance, adjustment and repair work on the product may only be carried out by a 
qualified person in a specialist facility.

ź

Make sure that the cable is compatible with your vehicle model.

ź

Cable should be disconnected from vehicle’s socket and power source if the product is not in 
use for a long time.

ź

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or 
crushing may cause its damage.

ź

Take into account the user’s manuals for other devices conected to the product.

ź

Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or 
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away 
from heat sources (such as stoves, radiators, fireplaces).

ź

If it rains during charging - do not let water get into the power socket and car charging port. If the 
plugs got wet - disconnect the mains fuse before pulling them out of the sockets.

ź

The product operation in adverse conditions is not allowed. Adverse conditions are primarily: 
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high 
humidity, surrounds of gases, dusts or flammable and aggressive liquids.

ź

It is forbidden to connect the cable to damaged sockets and plugs.

ź

Power cord should be laid in such a way as to eliminate the risk of stumbling or hooking over.

ź

Its forbidden to modify the product plugs and cord. In the case of modifications, the product 
may be damaged, causing threats to life, health and property.

ź

Store the EV cable freely so that the cord does not break.

ź

When disconnecting the cable from the power source and from the device, do not pull on the 
cord, but only on the part of the plug provided for this purpose.

EV cable

The II protection class device. It provides protection against electric shock against direct and 
indirect contact, and thanks to the additional isolation it is not necessary to connect the device 
case with the protective earth conductor. 

Summary of Contents for AK-EC-02






Reviews: