AK-EV-04 - user manual
p. 3
ź
Mains plug should be disconnect from power socket if the product is not in use for a long time.
ź
When disconnecting the power cord from the socket and from the device, do not pull on the
cord, but only on the part of the cable plug provided for this purpose.
ź
In case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
ź
All maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
Problem
Cause
Solution
A e-bike connected to an
electrical outlet via
power supply does not
work
No mains voltage
ź
Check the mains fuses
ź
Check the correct connection of
the power supply to the mains
socket
The power supply is
overloaded
ź
Disconnect the power supply
from the e-bike, check the
correctness of the current
parameters
There is a suspicion of a
product defect
ź
Stop using and contact the
seller
A e-bike connected to an
electrical outlet via
power adapter does not
charge the battery
The power supply does
not correspond to the
current parameters
ź
Contact with seller
ź
Disconnect the power supply
from battery and check if
current parameters are correct
Removing the most common problems
e-bike power supplies
3.
Make sure that the power adapter has propriet polarisation (+/-) to your e-bike.
1.
Select and connect the appropriate connector to power supply.
2.
Connect power cord to the electrical socket.
4.
Connect the power supply connector to the battery.
5.
Red lihgt sygnalise charging process.
6.
After charging light turn colour to green.
Preparing the Power Supply for Use:
Cleaning the power supply
ź
Do not use abrasive or chemical cleaners.
ź
Use soft and antistatic cloth for cleaning the power supply.
Disconect the power supply from the electrical socket and connected devices before cleaning.