AK-L1-025 - user manual
p. 4
LED Power Supply
Cleaning the power supply:
ź
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
Disconect the power supply from the electrical socket and connected devices before cleaning.
3.
Screw the cables: phase conductor (brown) to L connector, neutral conductor (blue) to
N connector, protective conductor (yellow-green) to FG / .
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
1.
Prepare the 3-wire power cable. WARNING! Make sure that the cables are not live.
4.
Turn on the power.
Connecting the Power Supply to energy grid:
1. Phase conductor connector (L).
2. Neutral conductor connector (N).
3. Protective conductor connector ( ).
4. Output connector from the power
supply (-V).
5. Output connector from the power
supply (+V).
6. Potentiometer for changing the output
voltage (+V ADJ).
7. LED diode indicating that the power
supply is on.
1
2
3
4
5
6
7
Product manufacturer:
Akyga Europe sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
Maximum power:
Voltage adjustment:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection) :
OCP (over current protection) :
OPP (overpower protection) :
OTP (over temperaturre protection) :
SCP (short circuit protection) :
Power supply connector:
Output connector:
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code :
AK-L1-025
110-265V , 50/60Hz
12V / 2A
25W
8.5-14 V
80%
5-50ºC
-40/+80ºC
Yes
Yes
Yes
Yes
Yes
Screw
Screw
IP20
CE, FCC, RoHS
YES
5901720134974
