AK-L1-075 - user manual
p. 4
LED Power Supply
Cleaning the power supply:
ź
Do not use abrasive or chemical cleaners.
ź
Use soft and antistatic cloth for cleaning the power supply.
Disconect the power supply from the electrical socket and connected devices before cleaning.
4.
Turn on the power.
1.
Prepare the 3-wire power cable. WARNING! Make sure that the cables are not live.
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
3.
Screw the cables: phase conductor (brown) to L connector, neutral conductor (blue) to
N connector, protective conductor (yellow-green) to FG / .
Connecting the Power Supply to energy grid:
Product manufacturer:
Akyga Europe sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
Maximum power:
Voltage adjustment:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection) :
OCP (over current protection) :
OPP (overpower protection) :
OTP (over temperaturre protection) :
SCP (short circuit protection) :
Power supply connector:
Output connector:
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code :
AK-L1-075
110-265V , 50/60Hz
12V / 6.25A
75W
11-15 V
80%
5-50ºC
-40/+80ºC
Yes
Yes
Yes
Yes
Yes
Screw
Screw
IP20
CE, FCC, RoHS
YES
5901720134998
4. Output connector from the power
supply (COM).
1. Phase conductor connector (L).
2. Neutral conductor connector (N).
3. Protective conductor connector ( ).
6. Output connector from the power
supply (-V).
7. Output connector from the power
supply (+V).
8. Potentiometer for changing the output
voltage (+V ADJ).
9. LED diode indicating that the power
supply is on.
5. Output connector from the power
supply (COM).
1
2
3
4
5
6
7
8
9
