AK-L2-100 - user manual
p. 4
LED Power Supply
Cleaning the power supply:
ź
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
Disconect the power supply from the electrical socket and connected devices before cleaning.
1.
Prepare the 3-wire power cable.
Make sure that the cables are not live.
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
3.
Solder or twist the input wires of the power supply with the power cable
the colors.
4.
Insulate the connected wires so that they do not touch and do not get wet.
5.
WARNING!
according to
Turn on the power.
Connecting the Power Supply to
:
energy grid
Product manufacturer:
Ropla Computers sp. z o.o.
ul. Wroc
ławska 1c
52-200 Suchy Dwór
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
M
a
ximum power:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection):
OCP (over current protection):
OPP (overpower protection):
OTP (over temperaturre protection):
SCP (short circuit protection):
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code:
AK-L2-100
110-265V , 50/60Hz
12V / 8.3A
100W
80%
5-50
ºC
-40/+80ºC
Yes
Yes
Yes
Yes
Yes
IP20
CE, FCC, RoHS
YES
5901720135032
1.
Phase conductor connector (L - brown).
2.
Neutral conductor connector (N - blue).
3.
Safety conductor connector (green - yellow).
4.
Output connector from power supply (COM - blue).
5.
Power supply i
connector (+V - brown).
nput
Wires collors:
